Direct Dial, Mobile or Switchboard: Which Number to Call

Direct Dial, Mobile or Switchboard: Which Number to Call

Call the mobile first, the direct line second and the switchboard last, in a session of its own. The mobile follows the person, the direct line reaches a desk that hybrid work has often emptied, and the switchboard reaches someone else. That default holds for most B2B lists, with a few exceptions tied to company size, persona and hour.

Three numbers, three different calls

The mobile follows the person wherever they work. In France it starts with 06 or 07. When it is answered, it is almost always the right person. It is also the most personal line, so the opener has to be shorter and the reason for the call clearer.

The direct line is a desk number tied to one person. It works when that person sits at that desk: larger companies, site-based roles, office days. Some companies forward desk lines to a laptop or a mobile. Many do not, and the line rings in an empty room.

The switchboard is the company's main line. Someone usually answers, which makes it look good in a report. But the person who answers is not your prospect. A pickup on a switchboard is a routing conversation, not a sales conversation.

This is why comparing pickup rates across number types misleads. The only fair measure is conversations with the person you were trying to reach.

What our benchmark says, and what it does not

Across 1,000,000 B2B cold calls in France, the average connect rate is 11.3%, with a range of 11 to 20% depending on persona and time slot.

We do not publish a split by number type, and we are wary of the figures that circulate. Most come from small samples, or from sources that never say what they counted as a connect.

What we can say from experience is narrower. Lists made of verified mobiles sit toward the top of that range. Lists heavy with switchboards look healthy on pickups and poor on conversations. And the mix of number types in a list moves its connect rate more than the script does. Two reps with the same pitch and different lists will not have the same day.

Your own numbers by type are worth more than anyone's average. The section on measurement below shows how to get them.

The default sequence for one contact

  1. Mobile, at the persona's hour. Founders pick up more around 10am, marketing around 4pm, HR around 1pm. Across personas, 4pm is the best slot at 15.8%, ahead of 10am at 14% and 8am at 9.8%.
  2. Mobile again, another day, another slot. A no-answer at 10am on Tuesday says little about 4pm on Thursday.
  3. Direct line, during office hours. In our experience midweek mornings are when desks are most likely to be occupied.
  4. Switchboard, in a dedicated session. Ask to be put through, and leave with information either way: is the person in today, when are they usually reachable, is there a better line.
  5. Back to the mobile, with what you learned. "Your colleague at reception told me Thursdays are better" is a human opener.

Leave space between attempts. Three calls to the same mobile in two days feels like pressure to the prospect, and in our experience a run of unanswered calls does nothing good for how your number is displayed. Vary the day, the hour and the channel.

Why switchboards get their own session

A switchboard call has a different script, a different rhythm and a different goal. The goal is a transfer or a piece of information, and the person in front of you is a colleague of your prospect, not an obstacle.

Mixing them into a mobile session breaks both. The rep has a trigger-based opener ready for a head of sales and lands on a receptionist. With several lines dialing at once it gets worse, because main lines and their voice menus answer fast and take the rep's attention away from the mobiles that matter.

One more check before the session. A number that appears on several contacts at the same company is a switchboard, whatever the column header says. Tag it as one, and do not ring the same reception five times in ten minutes for five different people.

When the default is wrong

Small companies. Under twenty people, the main line often rings on the founder's or the office manager's desk. Call it early. There is no gatekeeper to pass, only a short route.

Site-based roles. Plant managers, store managers and logistics leads live on a site, and the site line is how colleagues reach them too. Mobiles for these roles are harder to find and often shared.

Senior executives in large groups. The assistant manages the calendar. Going through the switchboard to the assistant is a legitimate route, not a detour. Treat the assistant as the person who can give you fifteen minutes, because they can.

Old or unverified mobiles. A mobile that now belongs to someone else is the worst outcome on a list: a stranger, interrupted, about a company they left. When the mobile's age is unknown, start with the direct line or the switchboard and confirm the person still works there.

A French note. A professional's mobile is often also their personal phone. Say who you are and why you are calling in the first sentence, and take an opt-out the moment it is given. The rules on calling evolve, so check the current ones for your targets before you build the list.

Measure your own rates by number type

  • Add a number-type field. Mobile, direct line, switchboard, unknown. Fill it at import, correct it after each call.
  • Count conversations, not pickups. For each type: dials, pickups, conversations with the intended person, meetings.
  • Read conversations per 100 dials. That is the figure that tells you where an hour of calling is best spent.
  • Then look at cost per conversation by data source. A mobile that costs more per contact can be cheaper per conversation than a free switchboard number.
  • Wait for volume. A few hundred dials per type before drawing a conclusion, and one persona at a time.

How Sonik approaches number choice

We treat number type as a list decision, made before the session starts. Mobiles go into the block scheduled at the hour their persona answers. Switchboards go into their own block with their own script.

Sonik AI dialer: the call list with live call statuses and meetings booked
The Sonik dialer during a session: parallel calls, statuses and the running count of meetings booked.

The parallel dialer gives reps about five times more conversations than dialing one line at a time. It matters most on the numbers that answer least: the dials that ring out cost the rep no waiting time, so direct lines stay worth trying.

The signals decide who deserves the mobile call first. Reps use only about 20% of the signals already in their CRM. A call to a mobile that opens with a real trigger, a website visit or a job change, is received very differently from a cold pitch on the same line.

Conclusion

Mobile first, direct line second, switchboard last and apart, unless the company is small, the role is on a site or the mobile is old. The number mix shapes your connect rate before the rep says a word. This week, tag the number type on your next list and count conversations per 100 dials for each type. After a few hundred dials you will have your own answer.