How to Test Your Best Cold Calling Time in Two Weeks

How to Test Your Best Cold Calling Time in Two Weeks

To find your own best cold calling time, test four hourly slots for two weeks, with the same list type, the same reps and at least 200 dials per slot, and compare connect rate per dial. Start from the benchmark hypothesis: in 1,000,000 French B2B cold calls, 10am (14.0%) and 4pm (15.8%) beat 8am (9.8%). Then check it on your market instead of trusting ours.

Why test at all

A benchmark is an average of other people's lists. Ours covers B2B calls placed in France, across many personas. Your list has its own mix of personas, countries and number types, and each of those shifts the best window.

The benchmark itself says so: its gaps may be correlations without demonstrated causality, to be tested in your own context. A two-week test is how you do that without turning it into a research project.

Step 1: pick one question and one metric

The most common mistake is to test "timing" in general. Pick one question.

  • Which hour gets the most pickups? Metric: connect rate, pickups divided by dials. This is the test described here.
  • Which day books the most meetings? Metric: meeting rate, meetings divided by conversations. It needs far more volume, because meetings are rare events. In our data the average meeting rate is 4.5%, against 11.3% for connect rate.

Start with the hour. It moves a frequent event, so it gives a readable answer in two weeks. Leave the day question for a quarter of data. What we already know about it is in the best day to cold call.

Step 2: choose four slots, not ten

Every slot you add divides your dials. Four is enough to learn something:

  • Two benchmark peaks: 10am and 4pm.
  • Two challengers: the slot your team uses most today, and one you suspect is underrated. In our data 5pm connects at 12.7%, above the 11.3% average, and few teams call then.

Define each slot as a full hour in the prospect's local time. If you call several countries, test one country at a time.

Step 3: get the sample size right

We exclude every segment under 200 calls from the benchmark's connect and time-slot rates. Use the same floor: 200 dials per slot, 800 for the test.

Be honest about what 200 dials can show. At a connect rate around 11%, the margin of error on 200 dials is roughly plus or minus 4 points. That is just enough to see a gap as large as 9.8% against 15.8%. It is not enough to separate 11.6% from 11.9%.

If you want to rank close slots, aim for 500 dials per slot, where the margin falls to under 3 points. If you cannot reach 200, the test will tell you nothing: keep the benchmark windows and collect longer.

How long does that take? In the benchmark, a rep dials 22 numbers per hour by hand, 52 on a power dialer and 157 on a parallel dialer. For 200 dials in one slot:

  • By hand: about nine one-hour blocks. A team of five gets there in two days per slot.
  • Power dialer: about four blocks.
  • Parallel dialer: under two blocks for a single rep.

Step 4: keep everything else constant

A timing test only works if timing is the only thing that changes.

  • Same persona in every slot. Founders pick up more around 10am and marketing around 4pm. If the 10am list is full of founders and the 4pm list full of marketers, you are measuring personas.
  • Random split of the list. Shuffle the list and deal it into four piles. Do not give the "good" accounts to the favourite slot.
  • Same reps, rotating. Each rep calls every slot across the two weeks.
  • Same numbers and caller ID. A new number pool in week two changes pickups more than the hour does.
  • First attempts only. A third attempt does not behave like a first one. Either test first attempts, or balance attempts across slots.
  • Both weeks, every weekday. Each slot should be called on each day of the week at least once, so one bad Friday does not sink a slot.

Step 5: read the result without fooling yourself

At the end, build one line per slot: dials, pickups, connect rate.

  1. Look at the gap, not the ranking. A gap of 6 points or more on 200 dials per slot is worth acting on. A gap of 1 or 2 points is a tie.
  2. Check each week separately. If the winner changes between week one and week two, you do not have a winner yet.
  3. Do not slice afterwards. Cutting the result by rep, by day and by industry after the fact will always produce a "pattern". Decide the cuts before the test.
  4. Count pickups by a real person. Voicemail, switchboards and wrong numbers are not connects.

Then act on it for a month: move the main calling block to the winning hour and measure conversations per day. If the count does not move, the test was noise.

The same logic applies to scripts. We describe it in how to A/B test cold call openers without fooling yourself.

What a timing test cannot tell you

It tells you when people answer. It does not tell you whether the conversation is good. The hour is worth about 1.6x on connect rate in our data. The opener is worth about 4x on meeting rate. Run the timing test once, bank the result, and spend the next test on the first 30 seconds. We rank the levers in does cold call timing really matter, and explain why published studies differ in why best-time-to-cold-call studies disagree.

How Sonik approaches timing tests

Sonik is an AI dialer for B2B outbound teams. Two things in it make this test short. Sessions are built per list, so each of the four piles becomes a session scheduled in its slot.

Sonik AI dialer: the call list with live call statuses and meetings booked
The Sonik dialer during a session: parallel calls, statuses and the running count of meetings booked.

And the parallel dialer calls several numbers at once, connecting the rep only on a pickup. At the benchmark pace of 157 calls per hour, one rep collects the 200 dials of a slot in under two sessions instead of nine.

Conclusion

Four slots, 200 dials each, one persona, random split, two weeks. That is the whole method. Expect to confirm one or both benchmark peaks, and occasionally to find a window of your own. This week, export last month's dials by hour and count how many slots already pass 200: you may have half the answer before you start. The benchmark windows are in best time to cold call: what 1M B2B calls reveal.